Find your next page
Site map.
Product workflows, documentation, support, and engineering guides. All in one place.
Product
Documentation
Support & policies
Engineering guides
- All guides
- CAN basics guides
- DBC files guides
- Logging and analysis guides
- J1939 guides
- Diagnostics and calibration guides
- AUTOSAR and vehicle networks guides
- Reverse engineering vehicle data guides
- Testing and validation guides
- Safety and security guides
- Tools and comparisons guides
- ISO/SAE 21434, UN R155 and R156 explained for CAN and ECU engineers
- ISO 26262 for CAN and test engineers: what functional safety means for messages
- SecOC explained: authenticated CAN messages with MACs and freshness values
- AUTOSAR E2E protection on CAN: counters, CRCs and Data IDs explained
- CAN fault injection: what to inject and how to check the ECU's reaction
- Automated CAN signal checks against a DBC: cycle time, range, counters and CRCs
- Restbus simulation from a DBC with python-can and cantools
- CAPL for Python and C engineers: the patterns, side by side with python-can
- HIL, SIL, MIL and PIL testing explained for ECU and CAN engineers
- Automated CAN reverse engineering: what the research shows
- OBD-II port pinout, buses and secure gateways: what you can reach
- Which ECU sends which CAN ID? Five ways to map a CAN bus
- Reverse engineering J1939 proprietary messages (PGN 0xEF00 and 0xFF00–0xFFFF)
- Reverse engineering LIN bus traffic and building an LDF
- Reverse engineering automotive Ethernet: from capture to SOME/IP signals
- SOME/IP and SOME/IP-SD explained with real packet bytes
- DoIP explained: UDS diagnostics over automotive Ethernet
- How ECU flashing works over UDS: the reprogramming sequence step by step
- UDS DTCs explained: service 0x19 and the DTC status byte
- CAN acceptance filters and mailboxes: how to calculate the mask
- CAN bit stuffing, CRC and arbitration, bit by bit
- CAN bit timing and sample point: how to calculate them
- OBD-II PIDs explained: supported-PID bitmaps, formulas, trouble codes and VIN
- Finding OEM data with UDS: how to scan DIDs with service 0x22
- How to find counters, checksums and CRCs in CAN frames
- Reverse engineering CAN signals with AI: a pipeline you can test
- How to reverse engineer vehicle data: CAN, LIN, Ethernet and OBD-II
- What Is CAN Bus? A Simple Guide for Engineers
- CAN Frame Types Explained: Data, Remote, Error, and Overload
- What Is J1939? A Simple CAN Bus Guide
- Common J1939 PGNs and SPNs: engine speed, vehicle speed, temperatures, fuel, and more
- How to decode J1939 data with a DBC file (and why half your frames don't decode)
- J1939 address claiming and the NAME field explained
- How to read J1939 fault codes: DM1, SPN, FMI, and lamp status explained
- What Is a PGN in J1939? PGNs and SPNs Explained
- J1939 transport protocol explained: BAM and RTS/CTS with examples
- How CAN works in AUTOSAR: the CAN stack from COM to the CAN driver
- What is AUTOSAR? Classic and Adaptive explained for CAN engineers
- What Is a DBC Viewer? How to Read CAN Database Files
- What Is CANalyzer? CANalyzer vs DBC Viewer
- What Is Canmatrix? Canmatrix vs DBC Viewer
- How to Use CAN Bus: A Simple Step-by-Step Guide
- How to Enable CAN Bus in Embedded C Code
- CAN Bus Python Example: Send and Receive Messages
- CAN Bus C++ Example: Send and Receive with SocketCAN
- What Is XCP? ECU Measurement and Calibration Explained
- XCP Python Example: Connect to an ECU with pyXCP
- XCP C++ Example: Connect to an ECU over CAN
- CAN Bus Diagnostics Example: Read Engine RPM with OBD-II
- What Is UDS? Unified Diagnostic Services Explained
- Python UDS Tutorial: Read a VIN with udsoncan
- How to validate a DBC file before release
- Multiplexed DBC signals explained without the usual confusion
- CAN error frames and bus-off debugging with SocketCAN
- Decode CAN logs with python-can and cantools
- CAN log file formats: candump, ASC, BLF, MF4, and CSV
- How to create a DBC file from reverse-engineered CAN logs
- How to use candump and can-utils for practical CAN bus debugging
- How to record CAN bus data without creating useless logs
- How DBC signal encoding and decoding works
- LIN bus for CAN engineers: where it fits and how to think about it
- Automotive Ethernet for CAN engineers
- Best tools to open BLF, ASC, and MF4 CAN log files
- Best CAN bus analyzer software in 2026: free and paid tools compared
- Best DBC editors in 2026: free and paid tools compared
- What's new in DBC Utility 2.0: log analysis, translation, and safer saves
- How to choose a DBC tool in 2026: editors, analysers, and libraries compared
- What is a DBC file? Format, syntax, and how engineers use it
- ARXML, DBC, and XDD files: which automotive network format to use when
- How to review DBC changes safely: a compare workflow for engineering teams
- Why CAN still matters and where it is better than other vehicle buses
- CAN FD explained: why classical CAN had to evolve
- Automotive Ethernet, ECUs, gateways, and the rest of the vehicle network stack
- DBC Utility vs CANdb++, BUSMASTER, SavvyCAN and other DBC tools